AquaPro Reverse Osmosis System- 4 Stage
Water is accessed via a separate faucet on top of the bench sink. They come complete with a stainless steel storage tank and 4 filters. RO stores the pure water ready for use and quietly and automatically produce pure water, and shut off when the tank is full.
Pure water is drawn from the storage tank when required. And then receives a final polish from the chemical reduction cartridge, just prior to drinking.
In addition, depending on how many people reside in the home, we can change the size of the storage tank.
Above all, it produces only the best tasting, pure drinking water for your good health.
Reverse Osmosis System Includes
- 4 Stage Watermark Certified RO System
- 4 Filters Included
- 12L Storage Tank
- White Tubing 2m
- Black Tubing 2m
- Yellow Tubing 2m
- Blue Tubing 2m
- Thread Tape
- Quick Connect Faucet Adaptor
- Dual Opening Spanner
- Inlet Water Valve
- Pressure Limiting Valve
- Drain Clamp
- Instruction Booklet
Stages 1-4 in breakdown form for all filters
- 1: Polypropylene Spun Sediment Filter 5 Micron-Replace @ 6 Months.
Removes silt, rust s&, algae, sediment, scale particles, dirt & cloudiness.
- 2: 100% Coconut Carbon Block Filter 5 Micron Replace @ 6 Months.
Removes herbicides, pesticides, chlorine, chlorine bi-products & Volatile organic compounds (VOC’s) protects the membrane.
- 3: 50GPD Reverse Osmosis Membrane 0.0001 Micron
Replace Every 1-4 Years (Depending On Water Quality)
Removes Over 98% or Impurities including Organic & Inorganic Minerals, Heavy Metals & Fluoride
- 4: 1 Micron Inline GAC Filter Replace Every 12 Months
In other words, it polishes the water and removes any taste or odour water may have picked up while sitting in the tank. Raises the pH to around 7 making it 97% pure.
Because it removes ions, unwanted molecules and larger particles from drinking water, makes it 97% pure. Also filters viruses, bacteria and parasites and repels heavy metals and removes fluoride and hydrocarbons
However, these reverse osmosis’s will need a plumber to install.
In conclusion, this RO system is certified to WaterMark Standards AS/NZS 3497. All products used under this certification will give you peace of mind knowing that your water filter complies with Australian plumbing codes. Installation instructions, general information and support are available.
If you require any assistance , please contact us on 0436 270 000