Online ordering or phone 0436 270 000. Delivering Australia Wide with Local Support.

BB PolySediment Filter 20micron

$40.00

BB PolySediment Filter 20micron 20″ x 4.5″. Used as pre-filters...

Available on back-order

Description

BB PolySediment Filter 20micron 20″ x 4.5″

These High Performance sediment cartridges are constructed from Polypropylene which is spun and melted simultaneously.
This technique means there is no center core to restrict filter performance.
These Sediment filters are compatible with most liquids. Sediment filters are an effective, dependable, low cost solution to removing suspended matter such as silt, rust, sand, algae, sediment, scale particles, dirt and cloudiness from water. Because of removing all the nasties out of the water, it leaves you with fresh, clean water.

Sediment filters have no chemical residuals therefore are extremely high performing, and carry a heavy load of sediment before requiring replacement.

BB PolySediment Filter 20micron

Effectively removes all traces of Gardia, thus allowing you to purchase any micron rating Carbon Filters, because regardless of the micron rating they will ALL extract the chemical elements.

This filter combination is suitable for ALL applications including town water. Also recommended for whole of house. It is ideal for mains connect whole of house. That is to say, where Pleated filters are good for tank water systems.
We use these filters-due to high performance -flow rate-load capacity & their inability to grow bacterial slime.

In addition, we offer these poly spun water filters in a pack with a GAC (Granular Activated Carbon) for mains connected whole of house.

When we say whole of house, it literally filters the whole house.  To sum up, includes bathrooms, laundry, and anywhere with a tap. You could also put a single under sink in the kitchen with a fluoride filter if you want to remove fluoride from the kitchen tap- so the rest of the house will have chlorine, dirt and rust removed.

Specs

  • Size: 20″ x 4.5″
  • Great for bore, tank, dam or even town water
  • Rating: 20 Micron (Nominal)
  • Replace : 6-12 months
  • Good chemical resistance
  • Cost effective
  • Meets FDA requirements for food and beverage contact.
  • Temperature : <80 degrees Celcius
  • Maximum internal pressure drop : 80PSI (5.5kg/cm2)
  • Replacing pressure drop : 35PSI (2.4kg/ cm2)
  • Used as pre-filters to carbon or just to stop debris going into house in a 20″ Big Blue System.

What is a Micron?

A micron is short for micrometer or one millionth of a meter. Now that’s a very tiny unit of measure!
The micron rating refers to the distance between pieces of filter media.
This determines the size of particles that the filter will allow to pass through.
In other words the lower the micron level of a filter, the more contaminants it can catch and most importantly, purify from your water..

Above all give the team from Aquaboss Water Filters a call on 0436 270 000 or contact us if you need any assistance.
In conclusion check out our blogssupport and general information

Additional information

Weight 0.6 kg
Dimensions 51 × 12 × 12 cm

Be the first to review “BB PolySediment Filter 20micron”

*