We will be taking a break from markets in July- You can still order online or by giving us a call

Matrikx P10 Carbon Filter


Matrikx P10 Carbon Filter removes chlorine taste and odor reduction as well as...

17 in stock (can be backordered)


Matrikx P10 Carbon Filter removes chlorine taste and odor reduction. 5 Micron

KX Technologies brand.

A 10 inch spiral wound activated carbon filter cartridge used for the reduction of the bad taste and odor of chlorine as well as dirt, sediment, rust, and other impurities down to the 5 micron level. The Matrikx P10 Carbon Filter is a unique and economical composite filter, being able to filter both sediment and chlorine.

Made of activated carbon particles infused into a uniform film and supported. Using polypropylene non woven webs. Features high chlorine taste and odor reduction along with a large dirt holding capacity. Therefore used for a wide range of residential, commercial, food service, pre and post reverse osmosis, and light industrial applications.

Matrikx P10 Carbon Filter Specifications:

  • Pressure: 2.0 PSI @ 1GPM
  • Temperature Range: 40 – 125?F
  • Filter Media: Activated carbon
  • Filter Life: About 2,500 gallons/12months
  • Max. Operating Pressure: 250 PSI
  • Flow Rate: Approx. 1 gallon per minute
  • Dimensions: 9 3/4″ length x 2 1/2″ width
  • Micron Rating: 5 micron nominal; 10 micron absolute
  • Flow Rate: 1 GPM @ 2.0 PSI (may vary depending on specific water filter system)
  • Removes/Reduces: Chlorine taste and odor, sediment, dirt, rust, organic contaminants, certain chemicals, and more
  • Flows outside to inside

Matrikx P10 filters flow in a radial (outside-to-inside) direction, which allows for increased dirt holding capacity and a lower pressure drop. Unlike granular activated carbon (GAC) filters, this filter cartridge will not channel or bypass because of the uniformity of its extruded carbon medium. The filter life of the Matrikx P10 filter is extended by depth filtration through multiple layers of polypropylene spunbonded filtration medium.

Above all, a micron is short for micrometer or one millionth of a meter. Now that’s a very tiny unit of measure!
The micron rating refers to the distance between pieces of filter media.
This determines the size of particles that the filter will allow to pass through.
In other words the lower the micron level of a filter, the more contaminants it can catch and purify from your water..

Therefore give the team from Aquaboss Water Filters a call on 0436 270 000 or contact us if you need any assistance.
In conclusion, check out our blogssupport and general information
You can find us at the markets too

Additional information

Weight .3 kg
Dimensions 30 × 3 × 3 cm

Be the first to review “Matrikx P10 Carbon Filter”