Description
OmniPure CL10RO T33 filter features granular activated carbon media. Reduces chlorine taste and odor in your drinking water. 5 Micron inline filter.
Granular Activated Carbon (GAC) OmniPure CL10RO T33 filter offers installation instructions located directly on the filter. Makes it super quick to install and super easy!
OmniPure CL10RO T33 filter replaces most inline 10″ x 2″ filters.
Firstly: Take note on the Flow direction arrow on the filter.
Secondly: Install John Guest fittings and hand tighten.
Thirdly: For quick connect fittings, push into the fitting as far as it goes. The built in mechanism will secure the tubing . Put plumbers tape on the threaded end on the John Guest fittings.
Lastly and most importantly: Flush out the new filter for around 10-15 seconds with mains pressure checking for leaks. If leaks occur, check the tightness of tubing and fittings.
OmniPure CL10RO T33 filter specifications:
- Dimensions: 2 inches x 10 inches
- 1,500 gallon capacity 5,600 litres
- Max. pressure: 125 PSIG
- NSF certified
- Made in the U.S.A
Replace cartridge when rated capacity (1,500 gallons/1 year) is reached or when flow rate drops
If you need Adapters: Straight AB-JG-14x14NPT-Straight, Elbow: ab-jg-14×14-elbow
To clarify: Ensure you put plumbers tape on the fittings and flush the OmniPure CL10RO T33 filter before use.
What does a Micron mean?
A micron is short for micrometer or one millionth of a meter. Now that’s a very tiny unit of measure! The micron rating refers to the distance between pieces of filter media. Above all, this determines the size of particles that the filter will allow to pass through. In other words the lower the micron level of a filter, the more contaminants it can catch and purify from your water..
Be the first to review “OmniPure CL10RO T33 filter”