PolySpun Sediment 1micron 30″ x 2.5″
Suits: All of House Filtration, De-Sal etc.
100% Polypropylene, Good chemical resistance. Also cost effective. Generally needs replacing in 12months depending on water quality and usage.
Sediment filters are an effective, dependable, low cost solution to removing suspended matter. Such as silt, rust, sand, algae, sediment, scale particles, dirt and cloudiness from water. Designed for high flow while retaining its micron rating.
Constructed from polypropylene which is spun and melted simultaneously. Therefore this technique means there is no centre core to restrict filter performance.
Used before a carbon filter to protect the life of the carbon when using a twin filter system.
Therefore, they are great for bore water and rain water. Used as pre-filtration in Twin Filter systems and Reverse Osmosis purification systems.
Meets requirements of the FDA for food and beverage contact.
PolySpun Sediment 1micron 30″ x 2.5″ Specs
- Effective and low cost
- Dependable, low cost solution
- Removes suspended matter such as silt, rust, sand, algae, sediment, scale particles, dirt and cloudiness from water.
- Excellent for Domestic & Commercial Pre-Reverse Osmosis usage
- Temperature : <80 degrees Celcius
- Maximum internal pressure drop – 80 psi
- Replacing pressure drop – 35 psi
Above all, a micron is short for micrometer or one millionth of a meter. Now that’s a very tiny unit of measure! The micron rating refers to the distance between pieces of filter media. This determines the size of particles that the filter will allow to pass through. In other words the lower the micron level of a filter, the more contaminants it can catch and purify from your water..