Online ordering or phone 0436 270 000. Delivering Australia Wide with Local Support.

ALL ORDERS MUST BE VERIFIED. PLEASE SEE DELIVERY FOR MORE DETAILS

XSential CX5-CF AP8000 series

$85.00

XSential CX5-CF AP8000 series compatible filter. Reduces particles and sediment,...

2 in stock (can be backordered)

Description

XSential CX5-CF AP8000 series compatible filter are manufactured to the highest standard specification. They are approved to Australian Watermark standard. These filters have been tested and proven to perform as good as the original. Replace 6months or earlier

XSential CX5-CF AP8000 series Features:

  • Reduces particles and sediment, chlorine, unpleasant taste & odour plus reduces limescale
  • 5 Micron rating
  • Min-Max Pressure 70-850kPa
  • Min- Max Temp 2-38ºC
  • Rated flow: 2Litres/minutes (1 gallon per min)

Replacement Instructions

  1. Turn off the water supply
  2. Press the faucet handle to release the water pressure
  3. Grasp the filter cartridge and rotate it anticlockwise until it stops
  4. Pull down and releasing it from the filter head
  5. Align replacement filter guide channels with the corresponding posts of the filter head and insert the cartridge upward until it fully seats into the head
  6. Rotate clockwise until it stops
  7. Turn on the water supply
  8. Reset the control panel if need be.
  9. Flush water through the filter for 5 minutes before use

What is a Quick Change Filter?

Quick Change Water Filters simplify this whole process by being designed in a way that eliminates the need to take out cartridges from their housing and deal with used filter media.

XSential CX5-CF AP8000 series quick-change cartridge are replaceable in its entirety without having to separate the cartridge from the filter housing.

This not only makes it easier to replace the cartridge. But you don’t need to deal with water spilling out or touching used filter media.

In addition, they’re affordable. Easy to use. And offer a safe and clean filter changeover experience.

Above alla micron is short for micrometer or one millionth of a meter. Now that’s a very tiny unit of measure! The micron rating refers to the distance between pieces of filter media. This determines the size of particles that the filter will allow to pass through. In other words the lower the micron level of a filter, the more contaminants the XSential CX5-CF AP8000 series filter can catch and purify from your water..

Similarly browse through more Quick change filters

Most importantly give the team from Aquaboss Water Filters a call on 0436 270 000 or contact us if you need any assistance.
In conclusion check out our blogssupport and general information
Also you can find us at the markets too

Additional information

Weight 0.6 kg
Dimensions 26 × 8.5 × 8.5 cm