Online ordering or phone 0436 270 000. Delivering Australia Wide with Local Support.

Ball Valves – 3/8″ Inline


Ball Valve 3/8″ Inline Quick Connect Tap – Suitable for all applications...


Ball Valves – 3/8″ Inline is suitable for all applications using 3/8 inch tubing. Ideally to place the inline before fridge filters so you don’t need to turn off the mains water. Makes switching filters and maintenance super easier when you can turn off the mains water.

Used in a full open or fully closed position.

Easily attached and released. Even better as you won’t need for tools.

Simply depress the small collar and tubing can be easily removed. Without the collar depressed, you can not remove the tubing.

Please note: Heating systems, compressed air, explosive gases, petroleum spirits or other fuels is not suitable.

You can find more ball valves here

Ball Valves – 3/8″ x 3/8″ Inline tap are used in residential, commercial, and institutional applications. They control the on-off flow of liquids and gases. Available in a range of sizes, materials, and connection types.

What is a Ball valve?

A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve’s status. The shut position 1/4 turn could be in either CW or CCW direction. (S = SHUT, O = OPEN)

Therefore give the team from Aquaboss Water Filters a call on 0436 270 000 or contact us if you need any assistance.
In addition, check out our blogs, support and general information

Be the first to review “Ball Valves - 3/8" Inline”